In buildings concrete floors are not always found in bathrooms. Due to national circumstances or for ecological planning reasons, it may occur that a wooden planking on a bearing structure serves as substrate for a shower base.
For this application purpose, LUX ELEMENTS offers the models TUB-LINE HQ (square), TUB-LINE HR (rectangular) and TUB-LINE H BOL (for the substitution of bath tubs). The models are equipped with a sealed-in floor channel drain 70 x 750 mm or 70 x 850 mm on the short side.
With an installation height of 20/30 mm and a build-in 4-sided gradient, these shower bases are particularly flat and can be easily integrated into existing wooden floors.
TUB-LINE H BOL 1800/900
The system offers two design options due to a reversible channel cover rail. One side has a brushed stainless steel surface, the other can be tiled to match the entire shower base. By simply turning, the desired side faces upwards
Separately provided adapters that can be cut as required enable height adjustability of the channel for surface covering thicknesses from 5 to 17 mm.