Standard-compliant sealing for highly stressed areas according to DIN 18534, Part 6
With integrated floor drain pump
LUX ELEMENTS®-TUB-PUMP
TUB-PUMP-S are hard foam shower base elements with integrated and sealed floor drain pump and an incorporated slope including 2 substrate elements. The floor drain pump has a capacity of 25 l/min (at 0,6 m height difference) and can be used wherever wastewater cannot reach the drainpipe by gravity flow. This can be the case, for example, in old buildings, in the attic or in the cellar.
Due to a float switch that starts the pump as soon as water hits the shower base, this is independent of the water supply through the pipe and even pumps away, for example, if you pour a bucket of water into the drain.
The 2-piece height-adjustable, reversible, stainless steel grate makes different design variants possible.
2-piece stainless steel reversible grate 
Installation height
* substrate element used depending on the installation situation
Please note: Dimensions in mm. Measures without adhesive coating and tiles.
TUB-PUMP-S MQ 900
Dimension: 900 x 900 x 40/45 mm
TUB-PUMP-S MQ 1200
Abmessung: 1200 x 1200 x 30/45 mm
TUB-PUMP-S MR 1200/900
Dimension: 1200 x 900 x 30/45 mm
TUB-PUMP-S MR 1400/900
Dimension: 1400 x 900 x 30/45 mm
TUB-PUMP
Also available as product variant TUB-PUMP with powerful floor drain pump with an installation height of 125 mm excluding glue layers. For further information and technical data, see the LUX ELEMENTS®-TUB-PUMP data sheet.