LUX ELEMENTS^®-TUB-COMBI
Standard-compliant sealing for highly stressed areas according to DIN 18534, Part 6

Extra-slim shower bases with integrated drain technology

LUX ELEMENTS^®-TUB-COMBI

The TUB-COMBI models combine a shower base or shower drain elements with a horizontal floor drain, which is already integrated.

Grate
standard grate or design grate
Grate fitting frame
cut-to-size
Shower base element
Hard foam support material with dual-sided mortar coating and glass fibre fabric, 4-sided slope with sealing on the upper side
Plastic reinforcement
for stability in the area of the drain pipe
Floor drain system
with integrated and sealed horizontal floor drain DN 40 with odour trap
Sealing sleeve
200 x 800 mm

Combination of shower base and horizontal floor drain support (connection DN 40)
Also available as shower base for the substitution of
bath tubs see TUB-COMBI-S BOL - Can be shortened in length through area without gradient
Factory sealing and prefabricated gradient (four-sided)
Extra-flat shower base height: 55/65 mm
For barrier-free construction
Second drainage level
Good drainage capacity: 0,8 l/s resp. 48 l/min
Large selection of grate fitting frames depending on the covering thickness (tile + adhesive) of the shower base:
- TUB RA-A with standard grate:
  from a covering thickness of 9 mm
- TUB RA-S with standard grate:
  from a covering thickness of 14 mm
- TUB-RA-DC/DM/DL/DV/DS/DF with design grate:
  from a covering thickness of 14 mm
- TUB-RA-DF with tileable cover:
  from a covering thickness of 14 mm